Selecting The Current Map - HP M2402 User Manual

Selecting the Current Map

In the Device Mapping Configuration menu, Select Current Map (1) is used to
select the Current map for each port or bus of a module.
When this option is selected, the Select Current Map screen is displayed. The
current map assignment is displayed at the top of the screen.
Figure 78
module.
Figure 78: Select Current map
Network Storage Router M2402 User Guide
is an illustration of the Select Current Map screen for a Fibre Channel
Caution: If this configuration setting is incorrectly set, processing difficulties
may occur. Before changing this setting, evaluate the need for the change and
verify the desired setting. HP recommends backing up the router configuration
to an external file before making changes to this setting.
Serial/Telnet User Interface
131