Serial/Telnet User Interface
Figure 87: Device List generated for a SCSI port
Note:
3. In the Device List, to add a device to the map, enter the number from the
Note:
map.
Creating a Map Entry for a Fibre Channel Map
To pre-enter a map entry for devices that are not yet online, select Create (C).
Note:
A series of questions is displayed. The questions will vary based on the 'Current'
map protocol. Required information includes the LUN address, protocol, port,
device name, and device type must be entered.
140
A target ID must be defined in the SCSI Configuration to add devices.
"Num" column.
If the selected device is already mapped, an error message will appear,
warning about adding a duplicate device.
If a device with LUN = "-' is selected, all LUNs for this Target will be added to the
All essential information about the device must be known.
Network Storage Router M2402 User Guide