Ethernet Connections - HP M2402 User Manual

Ethernet Connections

10/100BaseT Ethernet connectivity provides enhanced management and
configuration capabilities. The RJ-45 connector on the router can be directly
connected to a standard 10/100BaseT Ethernet network.
To allow configuration capabilities via this port, the IP network address must be
set. The IP network address can be manually assigned or dynamically assigned
using DHCP. Refer to
"Serial/Telnet User Interface"for details on setting the IP network address.
Note:
manufacturing process.
Ethernet interfaces include Telnet, SNMP, FTP, and an HTTP interface known as
StorageWorks Visual Manager (VM). For more information on router
management, see
Figure 25: Ethernet port
Network Storage Router M2402 User Guide
Chapter
The router has a unique Ethernet MAC address that is assigned during the
Chapter 3, "Configuration Overview."
4, "Visual Manager User Interface" or
Installation
Chapter 5,
29