Configuration Overview - HP M2402 User Manual

Configuration Overview

The StorageWorks Network Storage Router M2402 can be configured and
managed using several user interfaces (UIs). Each UI is introduced in this chapter,
along with information about common configuration settings.
Note:
Channel and SCSI devices is recommended. For information on SCSI standards,
refer to publications from the X3T10 committee of ANSI (American National
Standards Institute). For information on Fibre Channel standards, refer to
publications from the X3T11 committee of ANSI. For those who are interested in
purchasing approved American National Standards and Technical Reports, you can
contact ANSI at (212) 642-4900.
Network Storage Router M2402 User Guide
Router default settings
UI overview
Common configuration settings
— Controller LUN commands
— SCSI bus configuration
— Fibre Channel port configuration
— Fibre Channel arbitrated loop configuration
— Fibre Channel switched fabric configuration
— Discovery mode
— Host device configuration
— Logical unit management
— Buffered tape writes
Before attempting to configure the router, a basic understanding of Fibre
3
33