Power Modules - HP M2402 User Manual

The air exhaust vents on the back-side, shown in
unobstructed. The SCSI, Fibre Channel, and Ethernet ports are found on the
back-side of the router. Each port has LEDs that provide bus activity and link
status information. A single power connector and single power button are located
on the back-side.

Power Modules

The router is equipped with one power supply and has the capability of a
redundant power supply being added.
Figure 3: Power module
Power supply LED definition:
Network Storage Router M2402 User Guide
Green - Power has been applied to this module
Yellow - Power-On Self-Test (POST) in process or processor problems
Figure 2, must remain
Introduction
3