Parameters - Mitsubishi melservo-j2 series Instruction Manual

6. SERVO CONFIGURATION SOFTWARE

6.4 Parameters

Choose Parameters on the menu bar and choose Parameter List on the menu.
When the above choices are made, the following window appears:
(1) Parameter value write ( 1) )
Choose the parameter whose setting was changed and press the Write button to write the new
parameter setting to the servo amplifier.
(2) Parameter value verify ( 2) )
Press the Verify button to verify all parameter values being displayed and the parameter values of the
servo amplifier.
8) 9)
6 - 4
1)
2)
3)
4)
5)
6)
7)
10)