Table of Contents
Advertisement
6. SERVO CONFIGURATION SOFTWARE
6. SERVO CONFIGURATION SOFTWARE
The Servo Configuration software uses the communication function of the servo amplifier to perform
parameter setting changes, graph display, test operation, etc. on a personal computer.
6.1 Specifications
Item
Communication signal
Baudrate
(Note 2) Monitor
Alarm
Diagnostic
Parameters
Test operation
Position-Data
File operation
Others
Note: 1. On some personal computers, this software may not run properly.
2. Minimum resolution changes with the processing speed of the personal computer.
6.2 System configuration
(1) Components
To use this software, the following components are required in addition to the servo amplifier and
servo motor:
Model
Personal computer
OS
Display
Keyboard
Mouse
Printer
Communication cable
Note: Windows is a trade mark of Microsoft Corporation.
POINT
• Some functions of the Servo Configuration software may be unavailable
for some versions. For details, please contact us.
Conforms to RS-232C.
19200bps, 9600bps
Batch display, high-speed display, graph display
Alarm display, alarm history, data display at alarm occurrence
External I/O signal display, function device display, cumulative power-on time display, software
number display, tuning data display, ABS data display
Data setting, list display, change list display, detailed information display, I/O Devices
Jog operation, positioning operation, motor-less operation, output signal forced output, single-step
feed
Point Tables setting
Data read, save, print
Station setting, help display
Which contains a 80386 or higher CPU and on which Windows 3.1•95 runs
(80486 or higher recommended).Memory: 8MB or more, hard disk free space: 1MB or more, serial
port used.
Windows 3.1•95
640 400 or more color or 16-scale monochrome display which can be used with Windows 3.1•95.
Which can be connected to the personal computer.
Which can be used with Windows 3.1•95. Note that a serial mouse is not used.
Which can be used with Windows 3.1•95.
MR-CPC98CBL3M•MR-CPCATCBL3M
When these cannot be used, refer to Section 14.1.2 and fabricate.
(Note 1) Description
Description
6 - 1
Hide quick links:
Advertisement
Table of Contents
