Servo System With Auxiliary Equipment - Mitsubishi melservo-j2 series Instruction Manual

1. FUNCTIONS AND CONFIGURATION

1.6 Servo System with Auxiliary Equipment

WARNING
(1) MR-J2-100C or less
(Note2)
3-phase 200
to 230V power
supply or
1-phase 230V
power supply
No-fuse breaker
(NFB) or fuse
Magnetic
contactor
(MC)
L1
L2
L3
Control circuit terminal block
L21
L11
Regenerative brake
option
Note: 1. The HA-FF-UE, HC-SF, HC-RF series have Cannon connectors.
2. A single-phase 230V power supply may be used with the servo amplifier of MR-J2-70C or less. Connect the power supply to
L1 and L2 terminals and leave L3 open.
! To prevent an electric shock, always connect the protective earth (PE) terminal
(terminal marked
control box.
Options and Auxiliary Equipment
No-fuse breaker
Magnetic contactor
Set-up software
Regenerative brake option
Servo amplifier
MR-J2- C
MITSUBISHI
CHARGE
To CN2
U V
D
P
C
) of the servo amplifier to the protective earth (PE) of the
Refer To
Section 14.2.2
Section 14.2.2
Chapter 6
Section 14.1.1
To CN1A
To CN1B
To CN3
W
Protective earth(PE) terminal
U
V
W
1 - 14
Options and Auxiliary Equipment
Cables
Manual pulse generator
External digital display
Command device
Junction terminal block
Manual pulse generator
External digital display
Servo configuration
Personal
software
computer
MRZJW3-SETUP71E
or later
(Note1)
Encoder cable
(Note1)
Servo motor
Refer To
Section 14.2.1
Section 14.1.6
Section 14.1.5