Device Setting - Mitsubishi melservo-j2 series Instruction Manual

6. SERVO CONFIGURATION SOFTWARE

6.6 Device Setting

When using the device setting, preset "000E" in parameter No.19.
Choose Parameters on the menu bar and choose I/O Devices on the menu.
When the above choices are made, the following window appears:
(1) Function assignment batch-read ( 1) )
Press the Read All button to read and display from the servo amplifier the pins which have been
assigned functions.
(2) Function assignment batch-write ( 2) )
Press the Write All button to write to the servo amplifier the pins which have been assigned functions.
3) 5) 7)
1)
2)
4)
6)
6 - 8