Chapter 1: Before you install
Before you install
Read this chapter carefully before you begin the installation. If you are installing the Branch
Gateway at a customer site, read this chapter before going to the customer site.
Before going to site
Site requirements
Before going to site
Before going to the site, it is necessary to read the planning documentation and prepare
equipment required for installation.
Required equipment
Obtaining the Branch Gateway serial number
RFA access
License file with Survivable Remote Server
Downloading license and authentication files
ART for the RAS IP address
Downloading recent firmware
The EPW
Required equipment
Make sure you have the necessary equipment to assist you in the installation before you start
working.
Equipment required for installation
Equipment required for mounting
Equipment required for installing an S8300 Server
Quick Start for Hardware Installation: Avaya G450 Branch Gateway
Related topics:
on page 9
on page 14
Related topics:
on page 9
on page 11
on page 12
on page 14
on page 14
Related topics:
on page 10
on page 11
on page 11
on page 10
on page 10
on page 10
February 2011
9