Mount the devices
Branch Gateway racks
The Branch Gateway mounts in a standard 19-inch rack.
You can fasten the Branch Gateway to the rack either at the front of the Branch Gateway or at
the middle. In either case, mounting brackets must be attached to the Branch Gateway.
There are two types of mounting brackets provided with the Branch Gateway:
• Without cable guides. Two mounting brackets without cable guides are provided.
• With cable guides. One mounting bracket with cable guides is provided. This bracket
provides guides for electrical cables and is useful for cable management.
Brackets without cable guides
Brackets without cable guides
Mounting brackets without cable guides can be attached in either of the following positions:
• To each side of the front of the Branch Gateway for fastening the chassis to the rack at
the front
• To the middle of each side panel of the Branch Gateway for fastening the chassis to the
rack at the middle
Attaching a mounting bracket to the front of the Branch Gateway
20
Quick Start for Hardware Installation: Avaya G450 Branch Gateway
Related topics:
on page 20
February 2011