Chapter 3: Mount The Devices; Placing The Branch Gateway On A Table; Mounting The Branch Gateway Chassis - Avaya G450 Quick Start For Hardware Installation

Chapter 3: Mount the devices

Placing the Branch Gateway on a table

If you install the Branch Gateway as a tabletop unit, affix the provided rubber feet to the
underside of the Branch Gateway.
1. Remove the four feet from their packaging.
2. Turn the Branch Gateway upside down.
3. Position each foot into one of the mounting sites, near each corner of the chassis.

Mounting the Branch Gateway chassis

You can mount the Branch Gateway in a rack, on a wall, or on a table.
Electrostatic alert:
When handling any components of an S8300 Server or Branch Gateway, wear an anti-static
wrist ground strap. Connect the strap to an approved ground, such as an unpainted metal
surface.
Note:
Avaya has developed special hardware platforms for customers with harsh environmental
conditions. These platforms have been tested to meet stringent physical and environmental
requirements (i.e., shock, vibration, EMI, etc.) imposed by the United States Navy for use
on their ships. The platforms make use of specialized racks and reinforcements. If you wish
to obtain information about the design and implementation of such a ruggedized solution,
contact the Avaya Navy Shipboard Services organization.
Branch Gateway racks
Mounting the Branch Gateway on a wall
Quick Start for Hardware Installation: Avaya G450 Branch Gateway
Related topics:
on page 20
on page 24
February 2011 19