Attaching A Mounting Bracket With Cable Guides; Attaching Each Mounting Bracket To The Branch Gateway - Avaya G450 Quick Start For Hardware Installation

Mount the devices

Attaching a mounting bracket with cable guides

Attaching each mounting bracket to the Branch Gateway

The Branch Gateway is held in place by mounting screws through the two mounting ears. Fill
racks from the bottom; that is, mount units in the lower positions first, to avoid balancing
problems and cabling complications.
1. Position a bracket over the desired mounting position.
2. Affix the bracket to the chassis with five of the fifteen 6-32 x 3/8 screws provided.
3. Tighten with a screwdriver.
22 Quick Start for Hardware Installation: Avaya G450 Branch Gateway February 2011