Inserting The S8300 Server - Avaya G450 Quick Start For Hardware Installation

Table 2: Permitted slots for media modules
Media module
MM340
MM342
MM710
MM710B
MM711
MM712
MM714
MM714B
MM716
MM717
MM720
MM721
MM722
S8300B/
S8300C/S8300D

Inserting the S8300 Server

You can only install the S8300 in slot V1 on the left side of the Branch Gateway.
Quick Start for Hardware Installation: Avaya G450 Branch Gateway
Permitted slots
V3, V4, V8 Provides one E1/T1 WAN port for connecting to a
WAN endpoint device.
V3, V4, V8 Provides one USP WAN port for connecting to a
WAN endpoint device.
V1 – V8 Provides one E1/T1 trunk port for connecting an E1/
T1 telephone trunk.
V1 – V8 Provides one E1/T1 trunk port for connecting an E1/
T1 telephone trunk.
V1 – V8 Provides eight universal analog ports for connecting
analog telephones or trunks.
V1 – V8 Provides eight ports for connecting DCP
telephones.
V1 – V8 Provides four analog ports for analog telephones
and four analog ports for analog trunks.
V1 – V8 Provides four analog ports for analog telephones,
four analog ports for analog trunks, and an
emergency transfer relay.
V1 – V8 Provides one amphenol connector that connects to
a punch down block to provide 24 analog line ports.
V1 – V8 Provides one amphenol connector that connects to
a punch down block to provide 24 ports for
connecting DCP telephones.
V1 – V8 Provides eight ports for connecting up to eight ISDN
trunks or 16 ISDN BRI stations.
V1 – V8 Provides eight ports for connecting up to eight ISDN
trunks or 16 ISDN BRI stations.
V1 – V8 Provides two ports for connecting ISDN trunks.
V1 Server
Installing the media modules
Description
February 2011 29