Avaya G450 Quick Start For Hardware Installation page 13

Non-Avaya personnel may need to contact their service support or customer care center for
IP addresses, depending on entitlements.
Obtaining the RAS IP address and password
Obtaining the RAS IP address and password
1. Access the ART website on your laptop.
2. From the User menu, select Administer an S8xxx, Gxxx, CCS, CVLAN, or ASG
3. Enter your ART user name and password.
4. Click OK.
5. In the FL Number field, enter the customer's FL number.
6. In the Session Type field, select Installation Script Administration.
7. In the Product Type field, select Gxxx MEDIA GATEWAY if you want to configure
8. In the INADS field, enter the number of the telephone line to which you will connect
9. Click Start Installation script & IP Addr Admin.
10. Read the customer information displayed, to check that it is correct.
11. In the Customer Type field, select Other.
12. Click Continue Installation Script Administration.
13. Click the number of the product for which you are configuring remote access.
14. In the Product Name field, enter the product name.
15. In the INADS Number field, make sure the correct customer provided dial-in number
16. Click Continue Installation Script Administration.
Quick Start for Hardware Installation: Avaya G450 Branch Gateway
Related topics:
Guard II.
The Enter Network Password dialog box appears.
The Start of Installation script & IP Addr Admin
screen appears.
remote access for the Branch Gateway, or S8300 SERVER if you want to configure
remote access for the S8300.
the modem.
ART validates your input and the Customer Validation screen appears.
A product list appears.
The Gxxx MEDIA GATEWAY Installation Script Administration Data screen
appears.
for the Branch Gateway appears.
on page 13
Before you install
February 2011 13