Site Requirements - Avaya G450 Quick Start For Hardware Installation

Before you install
17. Click Download Installation Script File
Downloading recent firmware
Download any recently updated firmware for the Branch Gateway and media modules to your
laptop. Visit the Avaya Support website www.avaya.com/supportto check the latest firmware
image file versions against the factory installed versions in the hardware you are installing.
Download any firmware image file upgrades you need from the Avaya Support website, and
any Communication Manager service packs that may be required for the upgrade.
The EPW
The EPW is an Excel spreadsheet from which Avaya configuration wizards automatically pull
data to configure and install the S8300 Server and the Branch Gateway. The EPW is filled in
by the customer and project manager, and should be completed before installation.
Note:
For information on the EPW and the Avaya Installation Wizard, see the documentation for
Media Gateways release 5.2.
For greatest efficiency, obtain the Electronic Preinstallation Worksheet (EPW) from the Avaya
Support website at http://support.avaya.com/avayaiw.

Site requirements

Inspect the site before you begin the installation. Verify that the site requirements have been
met for adequate environmental conditions, power and grounding availability, safety, and
security conditions. If you find discrepancies between the specifications necessary for proper
installation of equipment and the conditions on site, contact your project manager before
proceeding with the installation.
The Branch Gateway may be installed in a 19" rack, mounted on a wall, or placed on a sturdy
table. Installation instructions are provided in
14 Quick Start for Hardware Installation: Avaya G450 Branch Gateway
ART generates the RAS IP address and password (CHAP secret key) and
generates an installation script for the product. Keep the RAS IP address and
password to configure your modem later.
to download the installation script to your laptop, or Email Installation Script File
to have the script emailed to you.
A script file is created and downloaded or emailed to you.
Installing the Branch Gateway. The ambient
February 2011