Service Modes; Service Modes (For Copier) - Panasonic DP-1510P Service Manual

5 Service Modes

5.1.

Service Modes (For Copier)

These service modes are provided to assist the technician in checking for abnormalities in the copier and a
means of making adjustments to the Input/Output of major components.
5.1.1. Service Mode Procedure
1. To select the service mode
The service mode is selected when "FUNCTION", "ORIGINAL SIZE" and "3" keys are sequentially
pressed, then F1 will appear in the display.
2. To exit the service mode
The service mode is reset when the "FUNCTION" and "CLEAR" keys are pressed simultaneously.
5.1.2. Service Mode Functions
Service
Mode
F1 Self Test
F2 Single Copy Test
F3 Continuous Copy Test
F4 Input / Output Status Test
F5 Function Parameters
F6 Adjustment Parameters
Edition 2.0
Service Modes
Item
00 CCD Test
01 LCD/LED Test
02 Page Memory Test
03 Print Test Pattern 1
04 Print Test Pattern 2
05 PRT PWM Adj. Pattern
This test is used for checking the CCD.
This test is used for checking the LCD
and LEDs.
This test is used for checking the Page
Memory.
Prints the pattern for setting the Paper
position alignment.
Factory use only.
Prints the gray steps when the Start key
is pressed. (Factory use only)
One sheet is copied when the Start key is
pressed.
Multi copies are made when the Start key
is pressed.
The functioning of Input / Output items
(selected item numbers) is checked.
Various function settings (selected by
code numbers) can be changed.
Various function settings (selected by
code numbers) can be adjusted.
248
DP-1510P/1810P
/1810F/2010E
Function
APR 2002