Siemens SINUMERIK 840D sl Operating Manual page 98

Setting up the machine
2.8 Monitoring axis and spindle data
Parameter
ZC1
Jaw type
ZC3
ZS3
ZE3
XR
ZR
98
Description
Main spindle chuck dimensions (inc)
Dimensions of the forward edge or stop edge
Jaw type 1

Jaw type 2

Chuck dimension, counter-spindle (inc) - only for a counter-spindle that has been
set-up
Stop dimension, counter-spindle (inc) - only for a counter-spindle that has been
set-up
Jaw dimension, counter-spindle (inc) - only for a counter-spindle that has been
set-up and "Jaw type 1"
Tailstock diameter - only for tailstock that has been set-up
Tailstock length - only for tailstock that has been set-up
Operating Manual, 02/2012, 6FC5398-8CP40-3BA0
Unit
mm
mm
mm
mm
mm
mm
Turning