Siemens SINUMERIK 840D sl Operating Manual page 264

Computerized numerical controllers

Hide thumbs Also See for SINUMERIK 840D sl:

Table of Contents

Creating a ShopTurn program

7.18 Example: Standard machining

2. Stock removal cycle for facing

Press the "Turning" and "Stock removal" softkeys.

Select the machining strategy.

Enter the following technology parameters:

Enter the following parameters:

Press the "Accept" softkey.

F 0.300 mm/rev

Roughing (∇)

Face (parallel to the X axis)

Operating Manual, 02/2012, 6FC5398-8CP40-3BA0

Sinumerik 828d turning