Programming technology functions (cycles)
8.7 Additional cycles and functions in ShopTurn
8.7.7
Mirroring
Furthermore, you can mirror all axes. Enter the axis to be mirrored in each case.
Note
Travel direction of the milling cutter
Note that with mirroring, the travel direction of the cutting tool (conventional/climb) is also
mirrored.
New mirroring
Table 8- 2
Parameters
Mirroring
Z
X
Y
504
Description
New
New mirroring
Additive
Additive mirroring
Mirroring of the Z axis, on/off
Mirroring of the X axis, on/off
Mirroring of the Y axis, on/off
Additive mirroring
Operating Manual, 02/2012, 6FC5398-8CP40-3BA0
Unit
Turning