Siemens SINUMERIK 840D sl Operating Manual page 762

Ctrl-Energy
20.3 Measuring and saving the energy consumption
Procedure
The selection of the axis to be measured depends on the configuration.
References
Information on the configuration is provided in the following reference:
System Manual "Ctrl-Energy", SINUMERIK 840D sl / 828D
762
1. The "Ctrl-Energy Analysis" window opens.
2. Press the "Start measurement" softkey.
The "Setting Measurement: Select Device" window opens.
3. Select the desired device in the list, possibly activate the "Measure part
program" checkbox, enter the number of repetitions, possibly select the
desired channel, and press the "OK" softkey.
The trace is started.
4. Press the "Stop measurement" softkey.
The measurement is ended.
5. Press the "Graphic" softkey, to track the measurement characteristic.
6. If you want to track the consumption values, press the "Details" softkey.
7. Press the "Save measurement" softkey to save the consumption values
of the actual measurement.
Operating Manual, 02/2012, 6FC5398-8CP40-3BA0
Turning