Managing programs
17.2 Opening and closing the program
Closing the program
Note
A program does not have to be closed in order for it to be executed.
700
5.
Press the "NC Select" softkey to switch to the "Machine" operating area
and begin execution.
When the program is running, the softkey is deactivated.
Press the ">>" and "Exit" softkeys to close the program and editor again.
- OR -
If you are at the start of the first line of the program, press the <Cursor left>
key to close the program and the editor.
To reopen a program you have exited with "Close", press the "Program" key.
Operating Manual, 02/2012, 6FC5398-8CP40-3BA0
Turning