Viewing Pdf Documents - Siemens SINUMERIK 840D sl Operating Manual

Managing programs

17.12 Viewing PDF documents

17.12 Viewing PDF documents
You can display HTML documents as well as PDFs on all drives of the program manager
(e.g. in the local drive or USB) and via the data tree of the system data.
Note
A preview of the documents is only possible for PDFs.
Procedure
722
1. In the "Program manager" operating area, select the desired storage
medium, i.e. the local or USB drive.
- OR -
Select the desired storage location in the "Commissioning" operating
area in the data tree of the "System data".
2. Position the cursor on the PDF that you want to display and press the
"Open" softkey.
The PDF is shown on the screen.
The storage path of the document is displayed in the status bar. The
current page as well as the total number of pages of the document are
displayed.
3. Press the "Zoom +" or "Zoom -" softkey to enlarge of reduce the size of
the display.
4. Press the "Search" softkey if you want to search for specific texts in the
PDF.
5. Press the "View" softkey to change the representation of the PDF.
A new vertical softkey bar appears.
6. Press the "Zoom page width" softkey to display the document in full
width on the screen.
- OR -
Press the "Zoom page height" softkey to display the document with full
height on the screen.
- OR -
Press the "Rotate left" softkey to rotate the document through 90
degrees to the left.
- OR -
Operating Manual, 02/2012, 6FC5398-8CP40-3BA0
Turning