Additional Data - Siemens SINUMERIK 840D sl Operating Manual

Tool management
16.5 Tool list
16.5.1

Additional data

The following tool types require geometry data that is not included in the tool list display.
Tool types with additional geometry data
Tool type
111 Conical ballhead cutter
121 End mill with corner
rounding
130 Angle head cutter
131 Angle head cutter with
corner rounding
140 Face milling
155 Bevel cutter
156 Bevel cutter with corner
rounding
157 Conical die-milling cutter
You can use the configuration file to specify the data to be displayed for specific tool types in
the "Additional Data" window.
Procedure
652
Machine manufacturer
Please refer to the machine manufacturer's specifications.
1. The tool list is opened.
2. In the list, select an appropriate tool, e.g. an angle head cutter.
3. Press the "Additional data" softkey.
The "Additional Data - ..." window opens.
The "Additional data" softkey is only active if a tool for which the
"Additional Data" window is configured is selected.
Additional parameters
Corner radius
Corner radius
Geometry length (length X, length Y, length Z)
Wear length (Δ length X, Δ length Y, Δ length Z)
Adapter length (length X, length Y, length Z)
V (direction vector 1 - 6)
Vector X, vector Y, vector Z
Geometry length (length X, length Y, length Z)
Corner radius
Wear length (Δ length X, Δ length Y, Δ length Z)
Adapter length (length X, length Y, length Z)
V (direction vector 1 - 6)
Vector X, vector Y, vector Z
External radius
Tool angle
Taper angle
Corner radius
Taper angle
Taper angle
Operating Manual, 02/2012, 6FC5398-8CP40-3BA0
Turning