Siemens SINUMERIK 840D sl Operating Manual page 31

Key
Turning
Operating Manual, 02/2012, 6FC5398-8CP40-3BA0
Function
<Cursor down>
 Editing box
 Navigation
+ <Cursor down> + <CTRL>
 Navigation
 Simulation
+ <Cursor down> + <SHIFT>
In the program manager and in the program editor, selects a
contiguous selection of directories and program blocks.
<SELECT>
Switches between several specified options in selection drop-
down list boxes and in selection boxes.
Activates checkboxes.
In the program editor and in the program manager, selects a
program block or a program.
+ <SELECT> + <CTRL>
When selecting table rows, switches between selected and not
selected.
+ <SELECT> + <SHIFT>
Selects in selection lists and in selection fields the previous
entry or the last entry.
<END>
Moves the cursor to the last entry field in a window, to the end
of a table or a program block.
Selects the last entry in selection lists and in selection fields.
+ <END> + <SHIFT>
Moves the cursor to the last entry.
Selects a contiguous selection from the cursor position up to the
end of a program block.
Moves the cursor downwards.
– Moves the cursor in a table to the next cell downwards.
– Moves the cursor in a window downwards.
– Moves the cursor in a table to the end of the table.
– Moves the cursor to the end of a window.
Reduces the override.
Introduction
1.2 Operator panel fronts
31