Multi-Channel Editor; Creating A Multi-Channel Program - Siemens SINUMERIK 840D sl Operating Manual

Multi-channel support

10.2 Multi-channel editor

10.2 Multi-channel editor
In the multi-channel editor, you have the option of simultaneously opening several programs
and editing them. In this case, the multi-channel editor supports you regarding program
synchronization from a time perspective.
10.2.1

Creating a multi-channel program

All of the programs involved in a multi-channel machining operation are combined in one
workpiece.
In a job list, enter the program names, define the program type - G code or ShopTurn
program - and assign these to a channel.
Requirement
● "programSYNC" option
538
Software options
You require the "programSYNC" option to generate and edit synchronized
programs in the multi-channel editor.
Software options
You require the "ShopMill/ShopTurn" option to generate and edit ShopTurn
programs.
Machine manufacturer
If you only program G code programs, then you can switch-out the multi-channel
view.
Please refer to the machine manufacturer's specifications.
Operating Manual, 02/2012, 6FC5398-8CP40-3BA0
Turning