Deleting A Zero Offset - Siemens SINUMERIK 840D sl Operating Manual

Setting up the machine
2.7 Zero offsets
2.7.6

Deleting a zero offset

You have the option of deleting zero offsets. This resets the entered values.
Procedure
92
1. Select the "Parameter" operating area.
2. Press the "Zero offset" softkey.
3. Press the "Active", "Base" or "G54...G599" softkey.
4. Press the "Details" softkey.
5. Position the cursor on the zero offset you would like to delete.
6. Press the "Clear offset" softkey.
Operating Manual, 02/2012, 6FC5398-8CP40-3BA0
Turning