Siemens SINUMERIK 840D sl Operating Manual page 271

6. Solid machine residual material
Turning
Operating Manual, 02/2012, 6FC5398-8CP40-3BA0
1. Press the "Cont. turn." and "St. remov. resid." softkeys.
The "Stock removal residual material" input window opens.
2. Enter the following technology parameters:
T Roughing tool_55 D1
3. Enter the following parameters:
Machining
Machining direction
Position
Machining direction
D 2inc
Cutting depth
UX
UZ
DI
Relief cuts
FR
Set machining area limits No
4. Press the "Accept" softkey.
Creating a ShopTurn program
7.18 Example: Standard machining
F 0.35 mm/rev V 400 m/min
Roughing (∇)
Longitudinal
external
0.4inc
0.2inc
0
Yes
0.200mm/rev
271