Siemens SINUMERIK 840D sl Operating Manual page 269

5. Stock removal (roughing)
Turning
Operating Manual, 02/2012, 6FC5398-8CP40-3BA0
1. Press the "Cont. turn." and "Stock removal" softkeys.
The "Stock Removal" input window opens.
2. Enter the following technology parameters:
T Roughing tool 80 D1
3. Enter the following parameters:
Machining
Machining direction
Position
Machining direction
D 4.000inc
Cutting depth
UX 0.4inc
UZ 0.2inc
DI
BL Cylinder
XD
ZD
Relief cuts
Set machining
area limits
4. Press the "Accept" softkey.
7.18 Example: Standard machining
F 0.350 mm/rev
Roughing (∇)
Longitudinal
external
(from front to back)
0
0inc
0inc
No
No
Creating a ShopTurn program
V 400 m/min
269