Siemens SINUMERIK 840D sl Operating Manual page 34

Introduction
1.2 Operator panel fronts
Key
34
Function
+ + <CTRL> + <ALT> + <C>
Creates a complete standard archive (.ARC) on an external
data carrier (USB-FlashDrive) (for 840D sl / 828D).
Note:
Please refer to the machine manufacturer's specifications.
+ + <CTRL> + <ALT> + <S>
Creates a complete standard archive (.ARC) on an external
data carrier (USB-FlashDrive) (for 840D sl).
Creates a complete Easy Archive (.ARD) on an external data
carrier (USB-FlashDrive) (for 828D).
Note:
Please refer to the machine manufacturer's specifications.
+ + <CTRL> + <ALT> + <D>
Backs up the log files on the USB-FlashDrive. If a USB-
FlashDrive is not inserted, then the files are backed-up in the
manufacturer's area of the CF card.
+ + <SHIFT> + <ALT> + <D>
Backs up the log files on the USB-FlashDrive. If a USB-
FlashDrive is not inserted, then the files are backed-up in the
manufacturer's area of the CF card.
+ + <SHIFT> + <ALT> + <T>
Starts "HMI Trace".
+ + <SHIFT> + <ALT> + <T>
Exits "HMI Trace".
+ <ALT> + <S>
Opens the editor to enter Asian characters.
<DEL>
 Editing box
 Navigation
+ <DEL> + <CTRL>
 Editing box
 Navigation
Deletes the first character right of the cursor.
Deletes all characters.
Deletes the first word to the right of the cursor.
Deletes all characters.
Operating Manual, 02/2012, 6FC5398-8CP40-3BA0
Turning