Siemens SINUMERIK 840D sl Operating Manual page 224

Creating a ShopTurn program
7.2 Program views
Parameter screen with help display and programming graphics
Figure 7-3
The animated help displays are always displayed with the correct orientation to the selected
coordinate system. The parameters are dynamically displayed in the graphic. The selected
parameter is displayed highlighted in the graphic.
224
1. Press the <Cursor right> key to open a selected program block or
cycle in the machining schedule.
The associated parameter screen with help screen is then
displayed.
2. Press the "Graphic views" softkey.
The programming graphics of the selected program block is
displayed.
Parameter screen with dynamic help display
In the screen, you can toggle between the help display and the program
graphics using the "Graphic view".
Operating Manual, 02/2012, 6FC5398-8CP40-3BA0
Turning