Creating a ShopTurn program
7.18 Example: Standard machining
12. Drilling
13. Positioning
278
1.
Press the "Drilling", "Drilling reaming" and "Drilling" softkeys.
The "Drilling" input window opens.
2.
Enter the following technology parameters:
T Drill_D5
3.
Enter the following parameters:
Machined surface
Drilling depth
Z1
DT
4.
Press the "Accept" softkey.
1.
Press the "Drilling", "Positions" and "Freely Programmable Positions"
softkeys.
The "Positions" input window opens.
2.
Enter the following parameters:
Machined surface
Coordinate system
Z0
C0
L0
C1
L1
C2
L2
C3
L3
3.
Press the "Accept" softkey.
D1
F 0.1 mm/rev
Face C
Tip
10inc
0s
Face C
Polar
0abs
0abs
16abs
90abs
16abs
180abs
16abs
270abs
16abs
Operating Manual, 02/2012, 6FC5398-8CP40-3BA0
V 50 m/min
Turning