When A Message Is Displayed On The Client Computer - Ricoh AFICIO MP 8000 Operating Instructions Manual

Troubleshooting When Using the Scanner Function
Message
Exceeded max.
data capaci-
ty.Check the
scanning resolu-
tion, then reset
original(s).
Exceeded max.
data capaci-
ty.Check scanning
resolution, then
press Start key
again.
Exceeded max.
page capacity per
file. Press
[Send] to send
5
the scanned data,
or press [Cancel]
to delete.

When a Message Is Displayed on the Client Computer

This section describes likely causes of and possible solutions for the main error
messages displayed on the client computer when using the TWAIN driver.
Important
❒ If a message not described here appears, act according to the message. For in-
formation about how to turn off the main power switch, see About This Ma-
chine.
Message
Clear Misfeed(s)
in ADF.
Invalid Winsock
version. Please
use version 1.1
or higher.
The name is al-
ready in use.
Check the regis-
tered names.
82
Cause
The scanned original ex-
ceeded maximum data
capacity.
The scanned data exceed-
ed maximum data capac-
ity.
The number of scanned
pages exceeded maxi-
mum page capacity.
Cause
A paper misfeed has oc-
curred inside the ADF.
You are using an invalid
version of Winsock.
You tried to register a
name that is already in
use.
Solution
Specify the scan size and resolution
again. Note that it may not be possible
to scan very large originals at a high
resolution. See "Relationship between
Resolution and File Size", Scanner Ref-
erence.
Specify the scan size and resolution
again. Note that it may not be possible
to scan very large originals at a high
resolution. See "Relationship between
Resolution and File Size", Scanner Ref-
erence.
Select whether to send the data so far.
Solution
Remove jammed originals, and place
them again.
Check whether the originals are suita-
ble to be scanned by the machine.
Install the operating system of the com-
puter or copy Winsock from the operat-
ing system CD-ROM.
Use another name.