Messages Displayed When Using The Scanner Function - Ricoh AFICIO MP 8000 Operating Instructions Manual

Message
Exceeded max.
number of files
which can be sent
at the same time.
Reduce the number
of the selected
files.
Cannot detect
original size.
Place original
again, then press
the Start key.
Exceeded max. No.
of results to
display. Max.:
You do not have
the privileges to
use this func-
tion.
Exceeded max.
number of standby
files. Try again
after the current
file is sent.
Exceeded time
limit for LDAP
server search.
Check the server
status.
The specified
group contains
some destina-
tion(s) that do
not have access
privileges. Do
you want to se-
lect only the
privileged desti-
nation(s)?

Messages Displayed When Using the Scanner Function

Cause
The number of files ex-
ceeded the maximum
number possible.
You have loaded paper of
a size not shown on the
paper size selector.
Search results have ex-
ceeded the max. display-
able number.
The machine has not been
set to allow you to use the
function.
The maximum number of
standby files was exceed-
ed.
A network error has oc-
curred and connection
has failed.
The specified group con-
tains some destinations
for sending by e-mail and
some destinations for
sending by Scan to Fold-
er.
Solution
Reduce the number of files and send
them again.
• Place the original correctly.
• Specify the scan size.
• When placing an original directly
on the exposure glass, the lifting/
lowering action of the ADF triggers
the automatic original size detection
process. Lift the ADF by more than
30 degrees. See "Placing Originals",
Copy/Document Server Reference.
Search again after changing the search
conditions.
Contact the administrator.
There are 100 files waiting in the send-
ing queue for e-mail, Scan to Folder, or
delivery functions. Wait until files have
been sent.
Try the operation once more. If the mes-
sage is still shown, the network may be
crowded. Check the information of
[System Settings]. See "System Settings",
General Settings Guide.
To select destinations for sending by e-
mail, press [Select] for the message dis-
played on the e-mail screen. To select
destination for sending by Scan to Fold-
er, press [Select] for the message dis-
played on the Scan to Folder screen.
5
77