Ricoh AFICIO MP 8000 Operating Instructions Manual page 162

Message
Print overrun.
Problem: Printer
Font Error
Punch has been
cancelled.
Receiving data
failed.
Sending data
failed.
Staple has been
cancelled.
The entered pass-
word is incorrect.
The print job has
been cancelled be-
cause capture
file(s) could not
be stored: Exceed-
ed max. memory.
The print job has
been cancelled be-
cause capture
file(s) could not
be stored: Exceed-
ed max. number of
files.
The print job has
been cancelled be-
cause capture
file(s) could not
be stored: Exceed-
ed max. number of
pages per file.
Messages Displayed When Using the Printer Function
Cause
Images were discarded
while printing.
An error has occurred in
the font settings.
Punch printing was can-
celed.
Data reception was abort-
ed.
The machine received a
command to stop trans-
mission from the printer
driver.
Stapling printing was can-
celed.
The password of the en-
crypted PDF file has been
entered incorrectly.
The HDD became full after
a file was stored.
The maximum file capacity
of the document server
was exceeded.
The maximum page capac-
ity of the document server
was exceeded.
Solution
On the RPCS printer driver's [Print
Quality] tab, open the [Change User
Settings...] dialog box, and then, on
the [Image Adjustments] tab, specify a
lower value for "Resolution".
Contact your service representative.
Check the paper orientation, print
orientation, and punch position.
Certain settings can produce print
results that might not be as expected.
Resend the data.
Check if the computer is working
correctly.
Check the paper orientation, paper
quantity, print orientation, and sta-
ple position. Certain settings can
produce print results that might not
be as expected.
Enter the correct password.
Delete the files stored in the docu-
ment server or reduce the file size to
be sent.
Delete the files stored in the docu-
ment server.
Delete some of the files stored in the
document server or reduce the
number of pages that you want to
send.
4
61