When The Function Status Indicator Lights Up In Red - Ricoh AFICIO MP 8000 Operating Instructions Manual

When the Machine Does Not Operate As Wanted
When the Function Status Indicator Lights
Up in Red
1
When an indicator to the right of a function key lights up, press the correspond-
ing function key. Then, follow the instructions displayed on the control panel.
Problem
Documents and reports
do not print out.
Documents and reports
do not print out.
An error has occurred.
The machine is unable to
connect to the network.
Note
❒ If an error occurs in the function you are using, check the message that ap-
pears on the control panel, and then refer to "When a Message is Displayed"
for the relevant function.
Reference
p.17 "Messages Displayed When Using the Copy/Document Server Func-
tion"
p.35 "Messages Displayed When Using the Facsimile Function"
p.54 "Messages Displayed When Using the Printer Function"
p.76 "Messages Displayed When Using the Scanner Function"
8
Cause
The paper output tray is
full.
There is no copy paper
left.
The function whose indi-
cator is lit is defective.
A network error has oc-
curred.
Solution
Remove the paper from the tray.
Add more paper. See p.87 "Loading Pa-
per".
Record the code number shown in the
display and contact your service repre-
sentative. See "When a Message Ap-
pears" of each chapter.
You can use other functions normally.
• Check the displayed message and
take an appropriate action. See
"When a Message Appears" of each
chapter.
• Check that the machine is correctly
connected to the network, and that
the machine is correctly set. See
"Network Settings", General Set-
tings Guide.
• Contact the administrator.
• When the function key is still lit,
even if you take the measures
above, contact your service repre-
sentative.