When You Have Problems Operating The Machine - Ricoh AFICIO MP 8000 Operating Instructions Manual

When You Have Problems Operating the
Machine
The following chart gives explanations of common problems and messages.
If other messages appear, follow the instructions displayed.
Important
❒ Check the contact address and Serial No. of Machine shown in the call service
message, and then contact your service representative.
Problem
" Please wait. " ap-
pears.
" Please wait. " ap-
pears.
Although the copier
screen appears when the
machine is turned on us-
ing the main power
switch, it cannot be
switched to another
screen by pressing the
{Printer} or {Scanner} key.
The machine has just
been turned on and the
User Tools screen is dis-
played, but the User
Tools menu has items
missing.
The display is off.
The display is off.
The display is off.
Nothing happens when
the operation switch is
turned on.
Cause
This message appears
when you turn on the op-
eration switch.
This message appears
when you change the ton-
er bottle.
Functions other than the
copier function are not
yet ready.
Functions other than the
copier function are not
yet ready. Time required
varies by function. Func-
tions appear in the User
Tools menu when they
become ready for use.
The screen contrast knob
is turned to the dark posi-
tion.
The machine is in Energy
Saver mode.
The operation switch is
turned off.
The main power switch is
turned off.

When You Have Problems Operating the Machine

Solution
Wait for the machine to get ready.
Wait for the machine to get ready.
Wait a little longer.
Wait a little longer.
Set the screen contrast knob to the light
position to see the display panel prop-
erly. See "Control Panel", About This
Machine.
Press the {Energy Saver} key to cancel
Energy Saver Mode.
Turn on the operation switch.
Turn on the main power switch.
1
9