Mixed Sizes Mode - Ricoh AFICIO MP 8000 Operating Instructions Manual

Mixed Sizes Mode

In Mixed Sizes mode, you can place originals of various sizes in the ADF at the
same time if their widths are the same.
Important
❒ When placing originals of different sizes in the ADF and making copies with-
out using the Mixed Sizes mode, paper might become jammed or parts of the
original image might not be copied.
❒ The sizes of the originals that can be placed in this mode are follows:
• Metric version
A3L and A4K, B4 JISL and B5 JISK, A4L and A5K
• Inch version
11" × 17"L and 8
❒ You can place originals of two different sizes in the ADF at the same time.
A
Press [Special Original].
B
Select [Mixed Sizes], and then press [OK].
C
Align the rear and left edges of the originals as shown in the illustration.
A Place the originals into the ADF
B
Vertical size
D
Adjust the guide to the original size.
E
Place originals in ADF.
F
Press the {Start} key.
" × 11"K, 8 " × 11"L and 5
1 1
/ /
2 2
" × 8
1 1
/ /
2
ANP073S
Placing Originals
"K
2
21
1