Ricoh AFICIO MP 8000 Operating Instructions Manual page 138

Message
The specified
group contains
some destina-
tion(s) that do
not have access
privileges. Do
you want to se-
lect only the
privileged desti-
nation(s)?
Cannot find the
specified path.
Please check the
settings.
Sender has not
been specified.
E-mail address
entered is not
correct. Please
re-enter.
You do not have
the privileges to
use this func-
tion.
Authentication
has failed.
Authentication
has failed.
Check whether
there are any
network problems.
{ }
13-10
Check whether
there are any
network problems.
{ }
13-11
Messages Displayed When Using the Facsimile Function
Cause
The specified group con-
tains some destinations
for sending by e-mail and
some destinations for
sending by Scan to Fold-
er.
The name of the compu-
ter or folder entered as
the destination is wrong.
The sender has not been
specified.
The entered e-mail ad-
dress is wrong.
Use of this function is re-
stricted.
Wrong login user name
or password.
Authentication is not
possible from this ma-
chine.
The alias telephone
number you entered is al-
ready registered on the
gatekeeper by another
device.
Cannot access gatekeep-
er.
Solution
To select destinations for sending by e-
mail, press [Select] for the message dis-
played on the e-mail screen. To select
destination for sending by Scan to Fold-
er, press [Select] for the message dis-
played on the Scan to Folder screen.
Check whether the computer name and
the folder name for the destination are
correct.
A sender's name should be specified
before sending e-mail. Send e-mail after
specifying the sender's name.
Make sure the e-mail address is correct,
and then enter it again.
Contact the administrator.
Confirm correct login user name or
password.
Contact the administrator.
• In [Facsimile Features], under [Initial
Settings], select [H.323 Settings], and
then check the alias telephone
number is correctly programmed.
You can also use the Web Image
Monitor for confirmation. See the
Web Image Monitor's Help.
• Consult the administrator.
• In [Facsimile Features], under [Initial
Settings], select [H.323 Settings], and
then check "Gatekeeper Address" is
correctly programmed. You can also
use the Web Image Monitor for con-
firmation. See the Web Image Mon-
itor's Help.
• Consult the administrator.
3
37