Messages Displayed When Using The Facsimile Function - Ricoh AFICIO MP 8000 Operating Instructions Manual

Messages Displayed When Using the
Facsimile Function
This section explains the machine's main messages. If other messages appear,
follow their instructions.
Message
Error occurred,
and transmission
was cancelled.
Put original
back, check it
and press the
Start key.
Cannot detect
original size.
Place original
again, then press
the Start key.
Functional prob-
lems with facsim-
ile. Data will be
initialized.
Remove the paper
from Internal
Tray 1.
Original is being
scanned by anoth-
er function.
Switch to the
following func-
tion, then press
the Stop key to
cancel scanning
or press the
Start key to con-
tinue.

Messages Displayed When Using the Facsimile Function

Cause
• Original jammed dur-
ing Immediate Trans-
mission.
• A problem occurred
in the machine, or
noise occurred on the
telephone line.
Original jammed during
Memory Transmission.
The machine failed to de-
tect the size of the origi-
nal.
There is a problem with
the fax.
The Internal Tray 1 is full. Remove the paper. If the other tray is
The machine is scanning
an original under another
function.
Solution
Press [Exit], and then send the docu-
ments again.
Place originals that have not been
scanned on the exposure glass or ADF
again.
Place original again, and then press the
{Start} key.
Record the code number shown in the
display and contact your service repre-
sentative. Other functions can be used.
also full, the tray name shown in the
display changes. Remove paper from
the tray indicated in the display.
Before sending a file by fax, cancel the
job in progress. To do this, press [Exit],
and then press the {Copy} or {Document
Server} key to display the suspended
function. Then, on the copier or docu-
ment server screen, press the
{Clear/Stop} key to display the "
Stop key has been pressed.
Are you sure you want to
" or "
stop copying?
/ Stop key was pressed. Are
you sure you want to stop
" prompt, and then press
scanning?
[Stop].
3
The
The Clear
35