Ricoh AFICIO MP 8000 Operating Instructions Manual page 169

Troubleshooting When Using the Printer Function
Problem
The printed image is
different from the im-
age on the computer's
display.
The printed image is
different from the im-
age on the computer's
display.
Images are printed at
slant.
4
Print is slanted.
Misfeeds occur fre-
quently.
Misfeeds occur fre-
quently.
Misfeeds occur fre-
quently.
Misfeeds occur fre-
quently.
Misfeeds occur fre-
quently.
Copy paper becomes
creased.
Copy paper becomes
creased.
White lines appear.
When printing graph-
ics, the output and the
screen are different.
Garbled characters
are printed.
68
Cause
With certain func-
tions, such as enlarge-
ment and reduction,
image layout might
be different to that on
the computer display.
You might have se-
lected to replace True
Type fonts with ma-
chine fonts in the
printing process.
The tray's side fence
might not be locked.
The paper is feeding
in at a slant.
The number of sheets
loaded exceeds the ca-
pacity of the machine.
The paper is damp.
The paper is too thick
or too thin.
The copy paper is
wrinkled or has been
folded/creased.
Printed paper is being
used.
The paper is damp.
The paper is too thin.
When D is blinking,
toner is beginning to
run out.
If the printer driver is
configured to use the
graphics command,
the graphics com-
mand from the ma-
chine is used to print.
The correct printer
language might have
not been selected.
Solution
In the application, change the layout, character
size, and character settings.
To print an image similar to that of the compu-
ter display, make settings to print True Type
fonts as an image. See the printer driver Help.
Check the side fence are locked. See p.94
"Changing the Paper Size".
Load the paper correctly. See p.87 "Loading
Paper".
Load paper only as high as the upper limit
markings on the side fence of the paper tray or
bypass tray. See "Copy Paper", About This
Machine.
Use paper that has been stored in the recom-
mended temperature and humidity condition.
See "Copy Paper", About This Machine.
Use recommended paper. See "Copy Paper",
About This Machine.
Use recommended paper. Use paper that has
been stored in the recommended temperature
and humidity condition. See "Copy Paper",
About This Machine.
Use recommended paper. See "Copy Paper",
About This Machine.
Use paper that has been stored in the recom-
mended temperature and humidity condition.
See "Copy Paper", About This Machine.
Use recommended paper. See "Copy Paper",
About This Machine.
Add toner. See p.99 "Adding Toner".
If you want to print accurately, set the printer
driver to print without using the graphics
command. See the printer driver Help.
Set the correct printer language.