Tunturi C85 Owner's Manual page 4

FRONT FRAME
1. Connect the cords from the front and rear frame tube
with each other.
2 . Connect the frame tubes with each other.
PLEASE NOTE: Do not damage the console cord!
3 . Tightly fasten the frame tubes with four allen screws
( C ),
FOOT BOARDS
Push the pedal crank into the foot boards.
CAUTION: Watch out for your fingers!
4
Attach both footboards on the pedal cranks with a long
screw from the side ( D ) and with two screws (
below. Lift the pedal cranks upwards to check when the
fastening holes meet each other.
HANDLES
1. Unscrew the fastening screw of the plastic cover at
the upper end of the front frame tube and turn the
cover aside.
2 . Set the base plate ( F ) for the right handle onto the
shaft. Set the handle at the end of the shaft and thread
the adjustment key cord from the handle over the shaft
into the front frame tube.
E ) from