Figure 12
monitor ports stats interface utilization command output
Clearing statistics
To clear statistics from counters, flush entries from a table, or end a Telnet
session, use the following command:
clear
This command includes the following options:
clear
followed by:
ip arp vlan <vid>
Copyright © 2004-2007, Nortel Networks
.
Clears Address Resolution Protocol (ARP) VIrtual
Local Area Network (VLAN) entries from the ARP
table.
•
Nortel Ethernet Routing Switch 8300 Series
Routine Maintenance
NN46200-514 03.01 Standard
4.0 27 August 2007
Checking port statistics and errors 45
<vid> specifies the VLAN ID in a range of 1
to 4094