User Mode 3 (Warm Sleep Mode On / Off & Timer Setting) - Konica Minolta KIP 9900 User Manual

2. 8. 3 User Mode 3
(Warm Sleep Mode ON / OFF & timer setting)
[Function]
It is possible to select whether or not the Warm Sleep Mode works. The timer for Warm Sleep can
be specified as well. If the KIP 9900 does not receive any print/copy for the time set as timer in
User Mode 3, it will go into the Warm Sleep Mode to save the power consumption.
Reference
Warm Sleep Mode is a kind of power saving mode. It works when the KIP 9900 does not print
for the time the timer specifies. Power consumption is reduced by maintaining the temperature
of fuser at a lower degree than usual stand by state.
Warm Sleep Mode will be cancelled automatically when a print job or a copy job is sent from
the outer device. However it may take time until the KIP 9900 starts printing as it needs to
recover enough temperature on the fuser. (Print does not start until the KIP 9900 gets ready
recovering enough temperature.)
[Operation]
1. Press the [ MENU ] Key 3 times to select the User Mode 3. [ MENU ] Key lights green and the
Status Display indicates "U3.".
MENU ENTER
Press [ MENU ] 3 times.
MENU ENTER
2-37
ONLINE
ONLINE
Chapter 2 Basic Operations