Let's Make Prints; Printing Flow; Step 1: Prepare The Printer Driver And Applications; Step 2: Load Paper Into A Tray - Konica Minolta bizhub PRO 1100 Quick Manual

2.1

Printing Flow

2

Let's Make Prints

This chapter describes a basic print workflow using this machine.
First confirm the basic flow to print data, then add detailed settings and adjustment to meet your requirements.
Reference
For information about application settings of this machine and adjustment procedures, refer to the HTML User's
Guide.
2.1 Printing Flow
First check that your original data is printed in the following flow.
The detailed operations or setting procedures are described in the reference page for each step.
Tips
The User's Guide CD supplied with this machine includes a sample PDF file for printing. This file is helpful if you have
no original data.

Step 1: Prepare the printer driver and applications

Install the printer driver and applications in your computer.
After installation is completed, configure information of the mounted devices
using the printer driver to use optional functions.
For details, refer to the following pages:
- To install the printer driver: Refer to page 3-1.
-
To install applications: Refer to page 3-9.

Step 2: Load paper into a tray

Load paper into the Main Body Trays or an optional paper tray.
For details, refer to the following pages:
- To load paper into the Main Body Trays: Refer to page 4-1.
- To load paper into Paper Feeder Unit: Refer to page 4-3.
2-1