Cam Lever And Stitch Dial - Singer 560 Operation Manual

p
CD
®
®
CAM LEVER AND STITCH DIAL
Cam Lever and its four positions
Set the knob of the Cam Lever on the selected position.
N - (NON-KNITTING)
used to pass the Carriage without knitting over the
needles in B position.
0 - (STOCKINET)
used to knit in stockinet only.
(No Pattern Card is used.)
L - (NORMAL LACE)
used to knit normal lace stitch patterns.
(Pattern Card must be used.)
P - (FASHION LACE)
used in fashion lace patterns.
(Pattern Card must be used.)
Stitch Dial
Stitch Dial for the Lace Carriage has the graduations 0
through 8 with an increment of 1/3 (represented by a dot).
Set the selected graduation of the Stitch Dial to
.A
mark .
TYPE OF YARN AND RECOMMENDED STITCH DIAL
SETTING
Recommended types of yarns are shown opposite in actual si ze,
and recommended Stitch Dial settings are shown in the table
below.
Do not use knobly or thick mohair yarn for the lace stitch pat-
terns.
Type of yarn
Stitch Dial Stitch Dial
(stockinet) (lace knitting)
CD Thin yarn (2-ply) 2-3
3-4
(2) Light yarn (3-ply)
3-5 4- 5
Q) Medium yarn (4-ply) 4-6 5-6
® Cotton thread (thin) 3--4
4-5
® Cotton thread (regular)
4- 5 5-6
@ Synthetic (thin)
2-3
3-4
(J) Synthetic (regular) 3-4 4- 5
@
Synthetic (regular) 3-4 4-5
® Mohair (thin) 3-5 4-5
- 36 -