6. Disconnect Ribber Carriage from Arm and move it to
the side of Yarn Changer, tilting it towards you.
7. For Knitter Carriage, set Cam Lever to "C" (C I R-
CULAR)
.
Remove yarn A from Yarn Clip and thread it into Yarn
Feeder.
Holding the yarn underneath the machine, and move
Knitter Carriage from the right to the left without
knit-
ting and connect it to the Ribber Carriage.
8. Re-set Cam Lever to "0" (STOCKINET) and knit the
initial row from the left to the right.
9. Suspend Cast-on Comb with Weights.
10. Knit subsequent 3 rows for east-on changing the carriage
settings as follows:
Cam Lever ................... C (CIRCULAR)
Set Lever (left) .............
[lJ
11. Re-set left Set Lever to
D
and set Stitch Dials to 2, then
knit one row from the left to the right.
Set the Driving Lever to the upright position.
-
91
-