What To Do If; If The Standard Carriage Has Jammed - Singer 560 Operation Manual

WHAT TO DO IF . ..
If the Standard Carriage has jammed ...
1. Remove the yarn from the Yarn Feeder.
2. Push the Release Lever in the arrow direction, and the
top of the Carriage lifts open .
If
the yarn has entangled with the Brushes on the Arm
or Yarn Feeder, remove the Arm from the Carriage and
disentangle the yarn.
3. With the top of the Carriage up, move the Carriage in
its proceeding direction till it gets clear of the fabric .
If
the Point Cams are in use, move the Carriage until it
passes the Cam.
4. Check the stitches, and if stitches have moved behind
the latches, replace them into the hooks using a Transfer
Tool.
5. Align the working needles in B position and unravel the
incomplete row referring to page 101.
6. With the top of the Carriage up, pass the Carriage to the
. side with the yarn end, press down the top of the Car-
riage and continue to knit.
- 104 -
If
the Row Counter, the Knit Contour and/or the Pat-
tern Card is/are in use, refer to
"If
incorrectly knitted ... "
on pages 108
&
109 before knitting again.