If The Holder Button Of The Yarn Changer Were Erroneously Operated; If The Yarn Changer Got Stuck On The Needle Bed - Singer 560 Operation Manual

If the Holder Buttons of the Yarn
Changer were erroneously operated ...
Correct positions of the Holders while knitting are as below.
® ..... 1 Holder (Knitting yarn)
(]) ..... 1 Holder (Yarn to be changed next)
@ .. .. 2 Holders (Resting yarns)
In case of more than two Holders positioned in ®.
( 1) Push Feeding Lever to the left, and the Holders in
® move back into (]).
(2) Push Release Button, and all the Holders align in @.
(3) Push the Holder Button to set it into (J) which should
hold the yarn in Yarn Feeder.
(4) Push Feeding Lever to the left to push the Holder
from
CD
into ® .
(5) Push Holder Button holding the yarn to be changed
next, from@ into
CD.
Then rearrange yarns on the Holders.
In case of more than two Holders positioned in (]), follow
the above steps (2) through (5) .
To repack Yarn Changer, set all the Holders
at @
by
operating as instructed in the above steps (1)-(2).
If the Yarn Changer got stuck on the
Needle Bed ...
Pull out Needle Retainer toward right by 2-3cm. using
Hook Tool, then loosen Securing Wheel until it stops.
- 11 2 -