To Turn Off The Machine During Knitting; To Knit Stockinet In The Course Of Pattern Knitting; To Knit A Selected Pattern Row Repeatedly; To Check The Knitted Row With The Pattern On The Pattern Card - Singer 560 Operation Manual

Hide thumbs Also See for 560:
Table of Contents

Advertisement

..)
0
0
I
0
0
-,.b-~
~
-10
~
I
'~
J[
\
lid~,~~
w
~
\
~
II
\
~~
@
[
55
- -
+
50
-
-
45
-
-
-
40
-
-
35
-
-
-
-
30
"'
-~
-
-
- -
25
-
-
-
\
II
~t
@
00
To turn off the machine during knit-
ting
Put
a mark
at
the
row visible
at
the Card Slit
before
turning
off the machine.
To
start
knitting
again,
1. Turn on the machine, and move the
Carriag~
twice to
memorize the positions of the Point Cam and Needle-1
Cam.
2. Set the Pattern Card so that the mark is above the Card
Slit. (Inspection Button light is off.)
3. Push ON the Inspection Button. (Light is on.)
4. Push 0 FF the Inspection Button to memorize the row
to
be knitted next. (Light is off.)
To knit stockinet in the course of
pattern knitting
Push ON the Inspection Button and knit with the Cam
Lever at
"0"
(STOCKINET).
If
you fail to push "ON" the Inspection Button, the Pattern
Card continues to-advance.
To
knit in
pattern knitting again, re-set the Cam Lever to
the original position
and
push the Inspection Button OFF.
To knit a selected pattern row re-
peatedly
1. Push 0 N the Inspection
Button.
2. Set the selected pattern row of the Pattern Card
at
the
Card Slit.
3. Push 0 F F the Inspection Button, the Card goes in and
the
selected
pattern row is memorized.
4.
Push 0 N the Inspection Button, the Card
comes
out
and
stops.
5. Start knitting, the
same
row is
knitted
repeatedly.
To check the knitted row with the
pattern on the Pattern Card
1. Push ON the Inspection Button, and the Card comes
out by 10 rows to
show
the pattern to be knitted on
the next row
at
the Card Slit.
2. Feed the Card
an
additional row to the direction op-
posite the Feeding Direction Pointer. This row of pat-
tern is
corresponding
to the last row knitted and hooked
on the needles.
To
start
knitting
again,
return the Card by one row reaching
its original position. Push 0 FF the Inspection Button.
IN CASE OF LACE STITCH, check the arrow mark on the
Pattern Card with the position of the Carriage before start-
ing to knit again.
103
-

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents